Pickleball is a famous sport that requires a lot of hand-eye coordination and quick reflexes. The paddle is an important part of the game and it is important to have a good grip on it. Over time, the grip on your paddle can wear down and need to be changed. In this article, we will go over the steps of how to put a new grip on your pickleball paddle.
How to put a new grip on a pickleball Paddle
When it comes to pickleball, having the right equipment can make an entire difference in your game. One of the most important pieces of equipment is your while playing paddle, and the grip is a crucial part. The grip is what allows you to hold and control the paddle through your hands, so it is necessary to acknowledge that it is in good condition. If you are looking to improve your grip over the paddle or change it up, the best way is to put a new grip on your paddle. In this article, we will go over the steps on how to put a new grip on your pickleball paddle.
First, you will require to gather your materials. You will need a new grip, an adhesive grip, a utility knife, and a grip-tightening tool (if you have this one). It is important to know that you will need to select the appropriate size grip for your paddle. If you are not sure what size you need, you can measure your current grip or consult with a pickleball professional.
The next step is to separate the old grip from the paddle. You have to use the utility knife to carefully slice the grip and tear it away from the handle of the paddle. Make sure to remove any little adhesive residue left on the handle.
Once the handle is dirt free, you can start applying the new grip. Start by applying the grip adhesive to the handle. Make sure to apply it evenly everywhere and completely cover the handle. Then, carefully slide the new grip over the handle, starting at the base of the handle and working your way up. Use the grip-tightening tool or a similar object to press the grip down and ensure it is securely held in place.
Let the grip dry for at least 24 hours before you use your paddle. This will allow the adhesive to fully cure and attach the grip to the handle.
It is required to note that you can also use an overgrip on your paddle. Overgrip is a thin layer of grip that is applied over the top layer of your existing grip. This is a fast and easiest way to refresh your grip and improve the grip of your paddle. To apply an overgrip, you will simply have to peel off the backing and wrap it around the handle of your paddle.
If you are looking to have an alternate grip or improve your game, putting a new grip on your pickleball paddle is the best option. By following these steps, you will be able to do it yourself and have better control of your paddle. Remember to be patient and take your time, and you will have a brand new grip in no time.
I. Preparing the Paddle
- Removing the old grip
To keep the newly furnished look of the paddle clean, you have to remove all the wear and tear grip away.
- Cleaning the handle
Clean the paddle property with a cotton cloth. Also, you can get it wet with water a bit to have good results.
II. Choosing the Right Grip
- Material options
There are different material options available like copper, steel, and plastic. It is recommended to select the best grip according to the paddle material.
- Size options
There are three different modes of sizes available for pickleball paddle grip. Choose the right one as required.
III. Applying the New Grip
- Wrapping the grip
Wrap the grip around the paddle tightly enough so that there is no extra place of air left behind. Then, add the adhesive glue inside it. Do not add too much or a little less. Just keep the glue in a moderate quantity.
- Securing the grip
Secure the grip tightly around the paddle. So that, you never get it separate from the paddle while playing.
IV. Maintaining Your Paddle
- Keeping your grip clean
Keep cleaning your paddle’s grip regularly, as it is the place where you hold the paddle. If it is kept well-cleaned and well-textured, it will help in increasing the better performance of playing pickleball.
- Replacing the grip regularly
If you purchased the grip a few years back, and now you are worried about its lifetime. Start figuring out the loopholes it has and try to implement the solution. You can check which areas need assistance and maintenance. Keep checking and replacing it regularly so you will not have to purchase a new expensive one.
Table of Materials:
- Replacement grip
Initially try to have a replacement grip at any time if you are planning to replace the grip.
- Grip adhesive
This it’s the most important thing to stick the grip with the paddle.
- Scissors or blade
Scissors and blades help to cut and tear down apart the unusable stuff.
- Rubbing alcohol or grip cleaner
Rubbing alcohol helps in cleaning and disinfecting hard surfaces.
Step 1: Preparing the Paddle
The first step in putting a new grip on your pickleball paddle is to take out the old grip. To do this, you can use scissors or a blade to carefully cut the grip from the handle. Once the grip is removed completely, use rubbing alcohol or a grip cleaner to clean the handle of any dirt or debris.
Step 2: Choosing the Right Grip
When you are choosing a new grip for your pickleball paddle, there are certain things to consider. First, you will have to decide on the material of the grip. There are several options available, including synthetic materials like Tacky, rubber, and foam, as well as natural materials like leather. Each material has git its benefits and drawbacks, so it is important to choose the one that fits your needs.
Next, you will need to select the size of the grip. Pickleball paddles come in different sizes, and it is important to choose a grip that fits your hand comfortably. A grip that is too small can cause discomfort and hand fatigue, while a grip that is too large can make it difficult to control the paddle.
Step 3: Applying the New Grip
Once you have chosen the best grip, it is time to apply it to your paddle. To do this, you will need to wrap the grip around the handle of the paddle. Start by applying grip adhesive to the handle, then carefully place the grip on the handle, making sure that it is placed right at the center and kept straight. Use your fingers to press the grip onto the handle and smooth out any wrinkles or bubbles.
Step 4: Securing the Grip
Once the grip is in place, it is important to secure it correctly. You can use grip adhesive or grip tape to hold the grip in place. This will ensure that the grip stays in place and does not slip or shift during play.
Step 5: Maintaining Your Paddle
To keep your new grip in better condition, it is important to maintain your paddle. Be sure to keep the grip dirt free by wiping it down with a damp cloth after each use. Additionally, be sure to change the grip on your paddle regularly, as it will wear down over time. By following these steps, you will be able to put a new grip on your pickleball paddle and enjoy improved control and better performance on the court. Remember to select the right grip material and size, apply it properly and maintain it well to ensure it lasts a long time.
By considering all these options, it is fair to say that applying a new grip is not a difficult task. Firstly, select the prepare the paddle that you want it to be, choose the right grip, apply the new grip, and maintain your paddle. All you need is to select the right kind of grip, follow the adhesive attaching steps, secure it properly with each other, and keep on maintaining the condition of the paddle regularly. Happy playing!